Electroplating anode bags, acid-base bags, filter bags, titanium blue bags

Specializing in the manufacture of anode bags for electroplating, titanium blue bags, the material of this type of bag is divided into two types: polyester and polypropylene, single-sided brushed, various specifications and sizes can be customized, quality assurance, welcome to consult and customize!

The anode bag is a bag made of cotton cloth or chemical fiber fabric that is placed on the anode to prevent the anode sludge from entering the solution. If the anode is impure, or the anode contains improper phosphorus, the anode bag is damaged, causing the anode membrane to overflow. Clean the anode and titanium basket every half month to one month, and replace the damaged anode bag to ensure that the plating solution and plating tank are free from pollution. The anode bag should use acid-resistant polyester cloth or polypropylene cloth. The density of latitude and longitude of the anode bag, the thickness specification, and the size of the pores have different effects on blocking the convection and diffusion of anode particles, black film mud particles and copper ions. Although the double-layer anode bag can effectively prevent the anode slime from entering the bath, it is not conducive to the dissolution of the anode, the voltage of the bath will increase, and the binding force of the phosphorus film will be affected. Do not let the anode bag be directly attached to the surface of the anode, and generally use a titanium basket to pack the outer anode bag.

It is mainly used for filtering chemical raw materials, liquid medicine, anti-corrosion chemical liquid, and electroplating liquid. Its characteristics are acid and alkali resistance and corrosion resistance.

Filter bag type:

1. Water filter bag (for pure water system);

2. Anode bag (or titanium blue bag) (for PCB, electroplating);

3. Filter bag (set on the filter);

4. PCB copper powder filter bag (for PCB copper powder filter);

5. PCB gold-plated copper-plated filter bag (both ends pass through) (for PCB electroplating);

6. Filter cloth (bag) for filter press (for sewage filter press)

7. Other types

Commonly used materials

Nylon, polyester, PP, PE, PO, polyester, nylon, etc.;

Filtration accuracy

1-200 microns;

features

The water filter bag is fully hot-melt welded or seamed, with plastic ring or stainless steel ring, which has the characteristics of pressure resistance, no shape change, no bypass phenomenon, high filtration efficiency, large dust interception capacity, not easy to block, acid and alkali resistance, etc.

Product application range

Electronic industry: pre-treatment of process water, magnetic tape coating agent, air pre-filtration

Chemical industry: lubricants, oils, phosphate paints, chemicals, hot solvents, etc. to remove particles

Environmental protection: industrial and domestic water, textile and paper wastewater, metal cutting fluid, cleaning agent filtration